Indicator Adapter
This was about a 3 hour project from James Hauser in the Dec/Jan 2005 Machinist Workshop magazine. The only change I made was to ream it 7/32" to accomodate my Fowler test indicator shank.
Indicator AdapterThis was about a 3 hour project from James Hauser in the Dec/Jan 2005 Machinist Workshop magazine. The only change I made was to ream it 7/32" to accomodate my Fowler test indicator shank. |
|
|
|
|
| The 2 simple parts. | Assembled for use. |
|
|
|